0 of 25 questions completed
You have already completed the test section before. Hence you can not start it again.
Test Section is loading…
You must sign in or sign up to start the test section.
You must first complete the following:
0 of 25 questions answered correctly
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
A pair of scissors is an example of:
A stapler is an example of:
A fishing rod is an example of:
If 5 kilograms is equal to 49 newtons, how much work is done when a 5 kilogram mass is raised a vertical distance of 15 meters?
How much power will it take to push a tire across the floor for 15 seconds when it only takes 240 joules to move it 8 meters?
Jeremiah does 15 joules of work to push a pencil over 1 meter. How much force did he use?
The Allegro Piano Moving Company uses a set of pulleys to reduce the force needed to lift a piano to 1,000 newtons. The piano is lifted 4 meters. How much work is used?
How much work is done using a 75-watt light bulb for 120 seconds?
A person in a wheelchair exerts a force of 25 newtons to up a 8-meter long ramp. If the height of the ramp is 3 meters and the total weight of the person with their wheelchair is 60 newtons, what is the efficiency of this machine?
A lever with an effort arm of 12 feet, and a load arm of 2 feet would have a mechanical advantage of:
A wrench is a useful tool in applying:
The formula to calculate work is:
Which of the following is not a simple machine?
Sarah did 60 joules of work when she threw a softball for 2 meters. How much force did she exert when she threw the softball?
Three gears are connected in a series. If the first gear turns clockwise, the third gear will turn:
Six gears are connected in a series. If the first gear turns clockwise, the sixth gear will turn:
Two gears are connected as part of a series. If the first gear has 10 teeth and the second gear has 50 teeth, what is the rotation ratio of the first gear to the second gear?
Two gears are connected as part of a series. If the first gear has 25 teeth and the second gear has 75 teeth, what is the rotation ratio of the first gear to the second gear?
The gears on a bike reflect a 4:3 turn ratio between the front wheel and back wheel. If someone pedals 40 revolutions per minute (rpm), how fast will the rear wheel rotate?
A lever with an effort arm of 4 inches and a load arm of 1 inch would have a mechanical advantage of:
A lever with an effort arm of 3 feet and a load arm of 6 inches would have a mechanical advantage of:
A load that requires 80 newtons of force to move will require ________ of force with a fixed pulley system.
A block and tackle pulley is set up with a mechanical advantage of 6. A mover could use it to reduce the amount of effort needed to move a load of 120 newtons with a force of:
What is the power of an electronic that can perform 5,400 joules of work in 18 seconds?
A mover applies 100 joules of work over the course of 10 seconds to move an item out of his truck. His power is calculated as: